- The Audio-Technica AT2035 Cardioid Condenser Microphone features a side-address design and can be used in critical home, project, or professional studio applications as well as live performances.
- Features cardioid pickup pattern for minimal feedback and off-axis noise. The element and output stage combine to produce a smooth yet natural audio quality with low noise.
- Equiped with 80 Hz high-pass filter switch for eliminating low-frequency hum and other associated noises, and a -10 dB pad switch provides more headroom when capturing transient signals.
- Integral gold-plated XLRM-type output connector enables the microphone to interface with a wide range of studio and live sound equipment.
~section~
Switchable High-pass Filter
The 80Hz high-pass filter provides easy switching from a flat frequency response to a low-end roll-off. The high-pass position reduces the microphone's sensitivity to popping in close vocal use.
Cardioid Polar Pattern
The cardioid polar pattern of the microphone is more sensitive to sound originating directly in front of the element, making it useful in controlling feedback, reducing pickup of unwanted sounds and providing isolation between performers.
Large Diaphragm
AT2035 features large diaphragm for smooth natural sound. Ideal for vocals and spoken word applications.
10 dB Attenuation Pad
Selectable 10 dB attenuation pad enables the microphone to handle high SPL signals without overload.
XLRM-type Connector
Integral gold-plated XLRM-type output connector enables the microphone to interface with a wide range of studio and live sound equipment.
~section~
| Product Type | Microphone |
| Brand | Audio-Technica |
| Model | AT2035 |
| Polar pattern | Cardioid |
| Frequency response | 20-20,000 Hz |
| Low Frequency Roll Off | 80 Hz, 12 dB/octave |
| Open Circuit Sensitivity | –33 dB (22.4 mV) re 1V at 1 Pa |
| Impedance | 120 ohms |
| Maximum Input Sound | 148 dB SPL, 1 kHz at 1% T.H.D. 158 dB SPL, with 10 dB pad |
| Noise | 12 dB SPL |
| Dynamic Range | 136 dB, 1 kHz at Max SPL |
| Signal-to-Noise Ratio | 82 dB, 1 kHz at 1 Pa |
| Power Requirements | 11-52V DC, 3.8 mA typical |
| Switches | Flat roll-off 10 dB pad |
| Output Connector | Integral 3-pin XLRM-type |
| Dimensions | 170 mm x 52 mm |
| Weight | 403g |
| Warranty | 1 Year |
| Package Contents | AT2035 Microphone AT8458 shock mount for 5/8 inch -27 threaded stands 5/8 inch -27 to 3/8 inch -16 threaded adapter soft protective pouch |